Tag Archives: Inventor Pro HSM

Inventor HSM Pro and Solid Edge Update

As I sit here this morning pondering things it dawned on me that life goes on and it may well not include this blog very soon. Unless you have had a blog and spent serious time and years as I have you may not understand how hard it is to close a chapter of your life out. And make no mistake it is one and this one including my time involved directly in various CAD CAM communities took perhaps thousands of hours of my time over the past six years. Yeah it has been that long.

Today what got me going was looking forward to attending the 2017 SEU which I have been absent from for two years now. It is an event I was material in helping to get revived but after discouragement over Siemens jettisoning Karsten Newbury and Don Cooper I quit going. So as I decide I want to go this year I read that basically they are going to do away with this event. It will now be regional and I suppose much shorter and the networking that can only be done at a national event will once again die for Solid Edge. I had looked forward to seeing familiar faces once more.

I have ST9 loaded and have been using it for a while now. Like always it is such a pleasure to use the best mid range MCAD modeller that has such powerful direct modeling capabilities. I think of Inventor and just shudder over how convoluted and irrational the workflow is and the direct editing shortfalls so prevalent there when compared to SE. Yeah I am sure glad to be back.

My understanding is that for ST10 the new modeling paradigm, whose name eludes me right now, (congruent modeling?) that was included in NX last year will be in SE this year. I hope this is getting back to the leaps in capabilities SE used to have each year and away from incremental improvements that were nice but left you wondering why you had spent so much money for them. However a trip with Inventor reminded me that incremental improvements with SE were far better than the subscription Hell that Autodesk is morphing their products into. Or the 35% increase in costs by 2019 for perpetual seats with the loss of some features which will become additional costs to license what used to be included.

So Yes nice to be back. Hate to see the end of SEU once again though.

Autodesk. I was asked for reasons I can’t reveal to become a beta tester this year for Inventor. So I download it and tried installing it on both a Win 7 and 10 box. Did not work and I got to thinking about it. Here we go again another hassle just to get running and then more time to give feedback to a company whose operational policies towards customers I despise. Scott sorry about this but I am just not going to help Autodesk out when all they want to do is stick it to me and all the other perpetual seat holders. I am getting, no I have gotten to the point where I don’t care what Autodesk does because I am not going to be there with them unless they have a complete change of heart.

They are right now changing the lack of forward motion with HSM and have assigned a good guy to be over finishing what they have started and promised. For years in some cases. Problem is that with the new anti seat policy it will be too late for many of us since we are leaving.

Talked with a support guy at my Autodesk VAR and mentioned I was not going to renew. It was kind of funny to hear his tone of voice when he asked why. I bet he is hearing that a lot lately and it has to be discouraging to work for a company that seems Hell bent on ruining what they spent so much time to build up. Hey Solid Edge here is another opportunity for you to acquire customers. I wonder how all the Delcam victims feel? I know how the HSM victims feel and we are not happy.

This is my first post using Win 10. I don’t know if WordPress has changed their site since the last time I posted or perhaps Win 10 just displays it differently. Don’t you just love it when software companies change things around and you have to spend your uncompensated time to learn how to do the same thing all over again?

Anyway you have made it through all my ramblings for yet another post. Fare well until next time.

Solid Edge Free For New Startup Companies

One of the things I figured that Autodesk would force on the market place is a change in how people were exposed to software. Solid Edge has had a 45 day trial for SE now for some time. However we all know that up to a half a year is more like it to really really find out if a software design program is a good and the right fit for a company in many cases. I think there are exceptions to that at times. Direct editing was such for me years ago when I first saw it in action. A whole new world of freedom from parametric chains was there before my eyes and it took about a half an hour to make the choice for SE.

As a sole proprietor though and the guy who was responsible for it all I could make that choice. For many companies it is not so simple.

I have always advocated for outfits with multiple seats  to get a power user on to SE and see what it could do while leaving the rest of the design department to remain on the primary program. Sadly I have also had to recommend this to companies who have SE but do not model in Synchronous. The very idea that such a powerful tool exists for customers and most blithely ignore it has been a pet peeve for some time.

One of the truly forward-looking things Autodesk has done is making software available to startups and students for free. A whole army of present and future trained users is being created and a ton of startup companies are being accustomed to the usage of Autodesk products because of this. Yes I believe as does Autodesk this will create more market share for them over time.

You don’t think this is important? Have you read the history of Solid Works? Have you ever tried to get an SW user to switch to something else? SW did not have to offer free because at the time they were the first kid on the block to do outreach and community well and had a cutting edge product to boot. Times have changed and now it takes more.

Autodesk has been working on all aspects of this with students and startups and community in the only way left in today’s market which is free to try.

Solid Edge Free to New Start-Up Companies

 

Solid Edge the best software you hardly ever heard of is now entering into this area although you would never know it based on the buffoons in Marketing and Publicity over there. Announced at the SEU2016 convention and subsequently followed up with nothing.

While there are restrictions and some one year time frames you can try it for a year under certain circumstances. I wish they had made the trials as all-encompassing as Autodesk has done but since they haven’t I am pleased they are at least doing this much.

Solid Edge is much better than Inventor in my opinion. It is also better than SW except in some complex modeling areas. Their sheet metal is the best and so is direct editing both of which are mid range MCAD leaders in todays CAD world. Also and very important. My favorite hate it topics are cloud and forced subscription design (and machining) software. SE suffers from neither of these great big no-no’s. With the demise of permanent seats for Inventor Pro HSM this is a critical plus for SE.

It’s just a shame that CAMWorks for SE turned out to be such a dog and expensive to boot. This is the real fly in the oinyment with SE right now and it will cost you $$$ to get started and for SE Classic and CW4SE 3 axis mill and Volumill and 2 axis lathe your cost per year would be more than the subscription fee for Inventor Pro HSM. You can subscribe to SE by the way but not CW4SE as far as I know. I don’t talk much about SE subs because I would never do it and don’t recommend you do it either. You need to OWN it.

Yes you would have a permanent seat and could step off at any time as I have done and still work for years. But you add up the appx $20,000.00 to get the above package, assuming no discount that is the price by the way, and yearly fees more than the whole subs shooting match from Inv Pro HSM and it is another story.

This is another area where Autodesk will make its presence felt with other companies soon in another way. What is the cost of ownership + yearly costs? If you are committed to renewing each year anyway and you can stomach Inventor the subscription model at Autodesk is much cheaper and has that Lovely HSM attached to it. SE has that dog barker CW4SE and much higher total costs to use.

How much value new companies or companies considering changing software will place on the security of permanent seats VS startup and continuing costs remains to be seen.  For existing users of other software Autodesks subs model is not a good deal for sure since the heavy expenses have already been spent. It costs these guys no more or little more to continue with their permanent licenses compared to Autodesks subs and who would be crazy enough to jettison their permanent seats in this case?

I believe though that as Fusion 360 becomes better, and it will, the cost there of $1,500.00 per year for CAD and CAM everything will force the rest of the market to drop prices considerably or be resigned to losing market share until they become in many areas irrelevant. I intend to find out later this year for myself and what I have been told is that Fusion360 is much closer to the way I am used to working in SE than Inventor is.

At the very least and under limited conditions SE is taking a swing at the plate and if you are shopping they deserve your consideration. They are the best mid range MCAD modeller for my world and may well be for yours to. While I am not a current customer of SE it is the only program I use for modeling and I fully recommend it.

People WAKE UP! The Cloud Will Kill Your Company.

I am watching all the hacking going on with Crooked Hillary’s evil empire and the Washington Swamp being exposed. One would think career criminals of her stature and decades of experience would be clever enough to hide the evidence or communicate in secure ways. But this got me to thinking of other things today. Before you go further though something completely entertaining. http://www.breitbart.com/tech/2016/11/02/bleachbit-mocks-hillary-clintons-cloth-or-something-server-gaffe/

Data that needs to be secure can only be kept secure when it does not go online. There is no doubt about this and anyone who is serious about it knows this to be true. Yes I know the human element can steal data as an inside job but that gets to be much harder to do and the perps run serious risks. Online is a shopping cart for bad guys and I would guess most never face any jail time or risk when doing so. There are a few things I want you to Google here. Try Googling “Chinese build stealth fighter with stolen info”. Now try “Dell made in China server boards have back doors”.  Now try “Huawei backdoor proof”.  Then go to “US military bans Lenovo”.

I know you have an inquiring mind or else you would not be here reading this post. So I want you to go and do some research for yourself to the best of your ability and tell me what you come up with regarding the jeopardy of online exposure to intellectual property. That silly stuff that just happens to make your livelihood  and your companies profits possible.

I want to be on record as stating that I see no way for a company that forces you to work online with a CAD or CAM program as being interested in your security. It is impossible for them to guarantee this and indeed they will not. Read the T&C for anything that forces you online from server farms to your favorite software. Tell me what you see. Do it with your own eyes and don’t accept the words of marketing or corporate officials who have a vested interest in you not knowing how bad it really is.

If you are silly enough to be spoon fed “online is secure” falsehoods and subject your future to it you deserve what you get. For those with a bit more sense it is high time to start looking into doing things in a secure way and make the companies you deal with either keep you off the cloud to work or guarantee your safety and cover any provable damages you may well incur because of what they made you do as a condition of software usage.

If they don’t isn’t it high time you give your money and future to a company that understands your future is more valuable to you than their’s is?